Google Reviews ★★★★★
0433 462 902 24/7 EMERGENCY SERVICES
Book Now

Electric Vehicle (EV) Charging Stations for Sydney

Book or quote your job

Licensed Level 2 ASP · 24/7 across Sydney · Fixed-price quotes

0433 462 902 Book Online

Electric vehicle (EV) charging station installation is a Level 2 ASP electrical service covering supply upgrades, dedicated circuit runs, and compliant charger connections for homes, businesses, and apartment buildings across Sydney. If you're buying an EV or upgrading to a faster charger, call 0433 462 902 or book online to arrange an on-site assessment. The work involves checking your switchboard capacity, running a dedicated circuit to the charge point, and — where your existing consumer mains or metering equipment need upgrading — completing that work under our Ausgrid Level 2 ASP accreditation. Every installation is certified with a Certificate of Compliance for Electrical Work (CCEW) and tagged to Australian standards before handover.

What's Involved

A typical home EV charger installation in Sydney includes:

  • Site survey — confirming consumer mains rating, switchboard capacity, charger location, cable route, and any strata or building-management requirements
  • Dedicated circuit from the switchboard to the charger location — 6 mm² copper for single-phase 7 kW, 10 mm² for 11 kW three-phase
  • Type A or Type B RCD at the switchboard (Type A is sufficient for most chargers with built-in DC fault detection; Type B for chargers without it)
  • Dedicated circuit breaker sized to the charger's rated load with allowance for continuous operation
  • Charger mounting and commissioning — secured to weatherproofed bracket, network-connected if smart, tested at full rated load
  • OCPP integration on smart chargers — connecting to apps like Tesla, Chargefox, JET

If your switchboard is full, we quote the switchboard upgrade in the same visit. If consumer mains need to go from 16 mm² to 25 mm², the Level 2 ASP component is included.

NSW Compliance

EV charger installation in NSW is governed by:

  • AS/NZS 3000:2018 Wiring Rules — circuit sizing, RCD protection
  • AS/NZS 3001.1 Electrical installations — Transportable structures and vehicles (mode 3 charging)
  • AS/NZS 3001.2 — fixed charging equipment
  • AS/NZS 4777.1 if the charger interacts with solar generation

Our credentials:

  • NSW electrical contractor licence
  • Level 2 ASP accreditation
  • $20 million public liability insurance

Every EV charger we install is issued with a Certificate of Compliance for Electrical Work (CCEW). Smart chargers are tagged into the relevant app and commissioning report supplied.

Pricing Approach

EV charger installation pricing in Sydney varies with:

  1. Charger location relative to the switchboard — short straight runs (carport next to garage) are cheapest; long runs through ceiling cavities and external walls add cable and labour
  2. Whether switchboard work is required — many older boards need MCB/RCD additions or a full upgrade
  3. Whether consumer mains need uprating — this is the Level 2 ASP component and adds the network fee

Typical Sydney pricing (charger supplied separately):

  • Simple single-phase 7 kW install, switchboard has space, cable run under 8 m: $580–$880
  • Three-phase 11 kW install with new circuit, switchboard has space: $1,200–$1,800
  • Install + switchboard upgrade + consumer mains uprate (older home): $3,400–$5,200

Frequently Asked Questions

What does EV charging station installation in Sydney actually include?
Installation covers a switchboard capacity assessment, a dedicated circuit run from your switchboard to the charge point location, and compliant connection of the EV charger unit. Where your existing consumer mains or metering equipment can't support the added load, the work also includes a Level 2 ASP supply upgrade coordinated with Ausgrid.
Do I really need a licensed electrician to install an EV charger, or can I do it myself?
You must use a licensed electrician — DIY installation of a hardwired EV charger is illegal in NSW and will void your charger warranty. Where a supply upgrade or metering work is involved, the job also requires a Level 2 ASP electrician, which is a higher authorisation class beyond a standard electrical licence.
What is a Level 2 ASP electrician and why does EV charging sometimes require one?
A Level 2 Accredited Service Provider (ASP) is authorised by Ausgrid to work on the service lines, metering equipment, and consumer mains that connect your property to the grid — work a standard electrician cannot legally touch. EV chargers often draw enough power that the existing supply capacity needs upgrading, which triggers the requirement for Level 2 work.
How do I know if my switchboard or mains supply needs upgrading before I can install an EV charger?
An on-site assessment is the only reliable way to confirm this — the electrician checks your current switchboard capacity, existing circuit loads, and whether your consumer mains are rated to handle the additional draw. Many Sydney homes with older switchboards or single-phase 40A mains will need an upgrade before a 7kW or higher charger can be safely installed.
Is installing a home EV charger worth it, or is a standard GPO plug fine?
A dedicated hardwired charger is worth it for most EV owners: it charges significantly faster than a standard 10A outlet, reduces overnight charging time from 12–20 hours down to 3–8 hours depending on your vehicle, and is the only safe long-term solution for regular charging. A standard GPO is not designed for sustained high-current loads and presents a real fire risk when used nightly.
Does EV charger installation need to comply with any Australian standards or require a certificate?
Yes — all installation work must comply with AS/NZS 3000 (the Australian wiring rules) and any applicable manufacturer and network requirements. A Certificate of Compliance for Electrical Work (CCEW) is issued on completion, and where Ausgrid supply work is involved, the relevant network notifications and approvals are handled as part of the job.
How long does EV charger installation take?
A straightforward installation — where no supply upgrade is needed — typically takes 2–4 hours on the day. Jobs requiring a Level 2 supply upgrade or metering changes take longer and may involve a separate Ausgrid coordination step, so the full process can span a few days from assessment to energisation.
How much does EV charger installation cost in Sydney?
Cost varies depending on your switchboard condition, the distance of the circuit run, whether a Level 2 supply upgrade is required, and the charger model being connected — so there's no single fixed price. Call 0433 462 902 or book an on-site assessment to get a fixed-price quote specific to your property.

Other electrical services we offer

Level 2 Electrician Emergency Electrician Safety Switches Switchboard Upgrade Smoke Alarms All electrical services →

Talk to a licensed Level 2 electrician

Fixed-price quotes, fully insured, 24/7 across Sydney.

0433 462 902 Book Online
Call now — 24/7 Book online