No Power To House Concord
Emergency Response in Concord
Licensed electrician dispatched fast · 24/7 · 30–60 min
Light-industrial conversions through the Inner West — the warehouse residences of Surry Hills' western edge, Erskineville, and Marrickville — have a unique electrical profile combining commercial-vintage switchboards with residential load patterns the original installation never anticipated.
- A broken main neutral — symptoms include partial power, lights dimming when appliances run, electronics buzzing or behaving erratically, and shocks from metalwork. Stop using the installation.
- A burning, plastic, or "hot wire" smell anywhere near the meter box
- Smoke or scorching at the meter or switchboard
- A buzzing or humming meter
- Hot tingles from any tap, sink, or appliance — points to a neutral or earthing fault
- Visible damage to overhead consumer mains (sagging, broken, or contacting trees)
- Sparks at the point of attachment
About Why Is There No Power to the House?
Total power loss in a Sydney home is caused by an Ausgrid or Endeavour Energy network outage, or a fault in your consumer mains, point of attachment, or service fuse. Exposed consumer mains or a failed service fuse is a shock and fire hazard — book a Level 2 ASP electrician or call 0433 462 902 for immediate response. If your neighbours have power and you don't, the fault is on your side of the meter and requires a Level 2 ASP licensed electrician, not your energy retailer. Sydney Electrical Service is dispatched 24/7 across every metropolitan suburb. If the whole street is out, call Ausgrid on 13 13 88 first.
What to Do Right Now in Concord
- Check whether the outage is local or network-wide. Look at your neighbours' lights or check the Ausgrid (13 13 88) or Endeavour Energy outage map online.
- If it's a network outage, wait. Crews will restore power. We cannot help with network-side faults.
- If your neighbours have power, the fault is on your installation.
- Open the switchboard. Check whether the main switch is in the OFF or middle (tripped) position.
- Try to reset the main switch once. If it holds, leave it alone and monitor for returning faults.
- If it won't hold, do not force it. Leave the main switch OFF and call us.
- Check the meter box for visible damage — burning, smoke, water, exposed cables, blackening.
- Photograph anything visible so we can dispatch with the right parts.
- If you smell burning or see smoke, evacuate and call 000 followed by us on 0433 462 902.
Electrical work in Concord
Renovation-era cable damage is a consistent issue in Inner West homes — the high-density extension and reno history through Newtown, Glebe, and Balmain has accumulated decades of pinched, drilled, or damaged cable that surfaces years later.
Common Questions
How do I know if it's a network outage or my problem?
What's a service fuse and where is it?
What's a "broken main neutral" and why is it dangerous?
Why might the main switch trip with nothing obvious going on?
Why Concord Residents Choose Us
Our Inner West vans carry replacement parts appropriate to the local building stock — 1990s-vintage breakers and RCDs for Federation conversions, modern RCBOs for full retrofits, and the surface-conduit hardware needed for heritage-listed installations.
Electricians across Inner West
Concord is part of the wider Inner West area our team covers. See our electricians across Inner West →
24/7 Emergency Electrician — Concord
Licensed, local & dispatched fast. Serving Concord 2137 and surrounding suburbs.