No Power To House Double Bay
Emergency Response in Double Bay
Licensed electrician dispatched fast · 24/7 · 30–60 min
Properties across Vaucluse, Rose Bay, Bellevue Hill, and Double Bay typically combine large-scale modern installations — multi-zone air conditioning, ducted vacuum, extensive downlighting, pool/spa equipment — with original switchboards rebuilt during the 1990s renovation wave that haven't kept pace with current load.
- A broken main neutral — symptoms include partial power, lights dimming when appliances run, electronics buzzing or behaving erratically, and shocks from metalwork. Stop using the installation.
- A burning, plastic, or "hot wire" smell anywhere near the meter box
- Smoke or scorching at the meter or switchboard
- A buzzing or humming meter
- Hot tingles from any tap, sink, or appliance — points to a neutral or earthing fault
- Visible damage to overhead consumer mains (sagging, broken, or contacting trees)
- Sparks at the point of attachment
About Why Is There No Power to the House?
Total power loss in a Sydney home is caused by an Ausgrid or Endeavour Energy network outage, or a fault in your consumer mains, point of attachment, or service fuse. Exposed consumer mains or a failed service fuse is a shock and fire hazard — book a Level 2 ASP electrician or call 0433 462 902 for immediate response. If your neighbours have power and you don't, the fault is on your side of the meter and requires a Level 2 ASP licensed electrician, not your energy retailer. Sydney Electrical Service is dispatched 24/7 across every metropolitan suburb. If the whole street is out, call Ausgrid on 13 13 88 first.
What to Do Right Now in Double Bay
- Check whether the outage is local or network-wide. Look at your neighbours' lights or check the Ausgrid (13 13 88) or Endeavour Energy outage map online.
- If it's a network outage, wait. Crews will restore power. We cannot help with network-side faults.
- If your neighbours have power, the fault is on your installation.
- Open the switchboard. Check whether the main switch is in the OFF or middle (tripped) position.
- Try to reset the main switch once. If it holds, leave it alone and monitor for returning faults.
- If it won't hold, do not force it. Leave the main switch OFF and call us.
- Check the meter box for visible damage — burning, smoke, water, exposed cables, blackening.
- Photograph anything visible so we can dispatch with the right parts.
- If you smell burning or see smoke, evacuate and call 000 followed by us on 0433 462 902.
Electrical work in Double Bay
Pre-2000 Federation conversions across Bondi, Coogee, Maroubra, and Bronte frequently still have ceramic-fuse boards mixed with retrofit RCDs, with aging air-conditioning circuits added to original 1960s capacity that routinely overload modern breakers under summer load.
Common Questions
How do I know if it's a network outage or my problem?
What's a service fuse and where is it?
What's a "broken main neutral" and why is it dangerous?
Why might the main switch trip with nothing obvious going on?
Why Double Bay Residents Choose Us
We are accredited Level 2 ASP contractors on Ausgrid's Eastern Suburbs grid, which means we can complete consumer-mains, point-of-attachment, and service-fuse work in a single visit — no waiting for separate Ausgrid attendance, no multi-trade coordination.
Also serving nearby
Electricians across Eastern Suburbs
Double Bay is part of the wider Eastern Suburbs area our team covers. See our electricians across Eastern Suburbs →
24/7 Emergency Electrician — Double Bay
Licensed, local & dispatched fast. Serving Double Bay 2028 and surrounding suburbs.