Google Reviews ★★★★★
0433 462 902 24/7 EMERGENCY SERVICES

Power Surge Damage Alexandria

Emergency Response in Alexandria

Licensed electrician dispatched fast · 24/7 · 30–60 min

24/7 Emergency ResponseLicensed & Insured30–60 Min ArrivalUpfront Pricing

South Sydney has Sydney's highest concentration of strata-managed residential property. Common-property switchboards, lift power supplies, fire indicator panels, and EV-charger common-property infrastructure dominate our local work.

⚠ Stop — Call Immediately if You Notice Any of These:
  • A surge-damaged appliance that "still works" may have degraded internal insulation
  • A burnt-out smoke alarm cannot warn you of fire
  • A failed surge protector cannot protect against the next surge
  • A damaged but operating microwave can leak microwave radiation
  • An AC compressor with damaged windings can short to earth and trip RCDs at random
  • A solar inverter fault may indicate a DC isolator or string fault that is still hot
  • Burning smell from any appliance
  • Smoke from a wall outlet, switchboard, or fixed appliance
  • A TV, oven, or dishwasher that is hot when off
  • Repeated tripping of an RCD on the surge-affected circuit
  • Buzzing or flickering lights that didn't behave that way before

About Power Surge Damage – What to Do Next

Power surges are caused by lightning during Sydney's summer thunderstorms, Ausgrid network switching after outages, and large local loads — welders, motors, air conditioners — cycling on shared neighbourhood transformers. A surge can incinerate unprotected electronics in microseconds — if devices have stopped working after a storm or a brief power blink, call 0433 462 902 or book a post-surge inspection.

TVs, modems, oven control boards, alarm systems, garage door openers, air conditioners, and pool controllers are the devices most commonly killed. The next priority is identifying everything that may be quietly damaged before it fails completely — Sydney Electrical Service dispatches 24/7 across every metropolitan suburb.

Full guide: Power Surge Damage – What to Do Next — causes, FAQs & expert advice →

What to Do Right Now in Alexandria

  1. Make a list of every electronic device that stopped working or behaves strangely after the surge.
  2. Unplug damaged devices to prevent further upstream effects.
  3. Check your switchboard for tripped breakers or RCDs and reset once if needed.
  4. Inspect the switchboard for the surge protector — most modern devices have a green/red status window. Red means it's done its job and is now spent.
  5. Check the solar inverter display for fault codes and screenshot any error messages.
  6. Photograph all damage — including device serial numbers and burn marks if visible.
  7. Save the data for insurance — many home and contents policies cover surge damage but require itemised proof.
  8. Don't replace damaged items immediately until the surge protection is repaired or upgraded — a repeat surge will destroy the new gear too.

Electrical work in Alexandria

Strata common-property switchboards reaching end-of-life are the dominant South Sydney electrical category — 1990s and early-2000s buildings now needing per-circuit RCBO retrofits, surge-protection devices, and main-switch replacements.

Common Questions

How do I know if my surge protector did its job or if it's now broken?
Most modern Type 2 SPDs (surge protective devices) have a status window — green means functional, red means the device has absorbed energy and reached end of life. A red status means the device must be replaced before the next surge event.
Will my insurance cover surge damage?
Most Australian home and contents policies cover power surge damage to specified items, often with a sub-limit per claim. Requirements vary, but you'll typically need: an itemised list of damaged equipment, photos, original purchase receipts where possible, and a licensed electrician's report. We provide insurance-grade reports as standard.
Can a surge damage my switchboard itself?
Yes. A major surge can degrade busbars, breakers, and surge diverters. After any significant surge event we recommend a switchboard inspection — often the only reliable test is insulation-resistance and thermal imaging.
Is a power board with surge protection enough?
No. Plug-in surge protectors are useful for individual devices but they only protect what's plugged into them, and many older ones have already absorbed surges they don't show. Whole-of-installation Type 2 SPDs at the switchboard are the proper protection.

Why Alexandria Residents Choose Us

South Sydney response times sit at the top of our network — typical 30–60 minutes for emergency dispatch from our nearest van, with priority response for strata common-property emergencies affecting multiple residents.

Also serving nearby

EveleighErskinevilleMascotWaterlooBeaconsfield

Electricians across South Sydney

Alexandria is part of the wider South Sydney area our team covers. See our electricians across South Sydney →

24/7 Emergency Electrician — Alexandria

Licensed, local & dispatched fast. Serving Alexandria 2015 and surrounding suburbs.

0433 462 902 Book Online — 60 Seconds
Call now — 24/7 Book online