RCD Tripping Concord
Emergency Response in Concord
Licensed electrician dispatched fast · 24/7 · 30–60 min
Light-industrial conversions through the Inner West — the warehouse residences of Surry Hills' western edge, Erskineville, and Marrickville — have a unique electrical profile combining commercial-vintage switchboards with residential load patterns the original installation never anticipated.
- A tingle, prickle, or buzz when you touch a tap, appliance, or shower fitting
- A burning, fishy, or "electrical" smell anywhere on the affected circuit
- Hot or discoloured power points on the affected circuit
- An RCD that holds for a few seconds then trips — strongly suggests a real, active leakage
- An RCD that won't trip when its TEST button is pressed — the device itself has failed
About Why Is My RCD Tripping?
RCD tripping is caused by earth leakage — most often a faulty appliance, moisture inside a fitting or cable, degraded wiring insulation, or cumulative leakage across shared circuits. If tripping repeats or returns after resetting, you have an active fault that can cause electrocution or fire; call 0433 462 902 or book a diagnostic before resetting again. Every trip must be treated as real: RCDs are the single most important shock-protection device in your switchboard.
Sydney Electrical Service handles RCD diagnostics 24/7 across every Sydney suburb — from older Federation cottages in Marrickville and Annandale to high-rise strata in Pyrmont and Zetland. Northern Beaches outdoor entertaining areas face accelerated insulation breakdown from salt air and weather, making them a frequent source of hard-to-trace earth leakage.
What to Do Right Now in Concord
- Open the switchboard. Find the tripped RCD (the toggle will be in the middle position, or fully OFF).
- Switch every breaker downstream of that RCD to OFF.
- Reset the RCD to ON. It should now hold because no circuits are live.
- Switch breakers back on one at a time with a 30-second pause between each.
- The breaker that re-trips the RCD is the faulty circuit.
- Unplug everything on that circuit and try again.
- If the RCD holds, plug appliances back in one at a time to find the offender.
- If it doesn't hold with everything unplugged, the fault is in the fixed wiring or a hardwired appliance — leave it OFF and call us.
Electrical work in Concord
Renovation-era cable damage is a consistent issue in Inner West homes — the high-density extension and reno history through Newtown, Glebe, and Balmain has accumulated decades of pinched, drilled, or damaged cable that surfaces years later.
Common Questions
What's the difference between an RCD and a safety switch?
What is "nuisance tripping"?
Should I test my RCD myself?
My RCD trips when I switch on the dishwasher (or kettle, dryer, washing machine). Is the appliance dead?
Why Concord Residents Choose Us
Our Inner West vans carry replacement parts appropriate to the local building stock — 1990s-vintage breakers and RCDs for Federation conversions, modern RCBOs for full retrofits, and the surface-conduit hardware needed for heritage-listed installations.
Electricians across Inner West
Concord is part of the wider Inner West area our team covers. See our electricians across Inner West →
24/7 Emergency Electrician — Concord
Licensed, local & dispatched fast. Serving Concord 2137 and surrounding suburbs.