RCD Tripping Putney
Emergency Response in Putney
Licensed electrician dispatched fast · 24/7 · 30–60 min
Western Sydney homes — post-war brick veneers across Bankstown and Liverpool, Federation cottages through Parramatta and Auburn, modern estate builds from Penrith to Pennant Hills — span a 70-year vintage range with switchboard ages and conditions to match.
- A tingle, prickle, or buzz when you touch a tap, appliance, or shower fitting
- A burning, fishy, or "electrical" smell anywhere on the affected circuit
- Hot or discoloured power points on the affected circuit
- An RCD that holds for a few seconds then trips — strongly suggests a real, active leakage
- An RCD that won't trip when its TEST button is pressed — the device itself has failed
About Why Is My RCD Tripping?
RCD tripping is caused by earth leakage — most often a faulty appliance, moisture inside a fitting or cable, degraded wiring insulation, or cumulative leakage across shared circuits. If tripping repeats or returns after resetting, you have an active fault that can cause electrocution or fire; call 0433 462 902 or book a diagnostic before resetting again. Every trip must be treated as real: RCDs are the single most important shock-protection device in your switchboard.
Sydney Electrical Service handles RCD diagnostics 24/7 across every Sydney suburb — from older Federation cottages in Marrickville and Annandale to high-rise strata in Pyrmont and Zetland. Northern Beaches outdoor entertaining areas face accelerated insulation breakdown from salt air and weather, making them a frequent source of hard-to-trace earth leakage.
What to Do Right Now in Putney
- Open the switchboard. Find the tripped RCD (the toggle will be in the middle position, or fully OFF).
- Switch every breaker downstream of that RCD to OFF.
- Reset the RCD to ON. It should now hold because no circuits are live.
- Switch breakers back on one at a time with a 30-second pause between each.
- The breaker that re-trips the RCD is the faulty circuit.
- Unplug everything on that circuit and try again.
- If the RCD holds, plug appliances back in one at a time to find the offender.
- If it doesn't hold with everything unplugged, the fault is in the fixed wiring or a hardwired appliance — leave it OFF and call us.
Electrical work in Putney
Multi-zone AC retrofits in Western Sydney homes typically encounter switchboard capacity limits — original single-phase 40–60 A supplies are tight for the multiple AC compressors common in newer family-home additions.
Common Questions
What's the difference between an RCD and a safety switch?
What is "nuisance tripping"?
Should I test my RCD myself?
My RCD trips when I switch on the dishwasher (or kettle, dryer, washing machine). Is the appliance dead?
Why Putney Residents Choose Us
From sub-$200 outlet repairs to $40,000 switchboard-and-consumer-mains rebuilds for multi-storey post-war additions, we bring the same Level 2 ASP capability to every Western Sydney job — fast response, region-appropriate parts, insurance-grade documentation.
Also serving nearby
Electricians across Western Sydney
Putney is part of the wider Western Sydney area our team covers. See our electricians across Western Sydney →
24/7 Emergency Electrician — Putney
Licensed, local & dispatched fast. Serving Putney 2112 and surrounding suburbs.